The RUNLIN™ RCL8 (similar as 3M Part NO. 98-KC 8 ) provides the correct cold shrink tube to make the installation of coax and low voltage connectors seals easy. The installation does not require tooling, and the quality of the installation is less installer dependent.
RUNLIN™ cold shrink tubes are open ended, silicone rubber, tubular sleeves. The sleeves are factory expanded and assembled on a removable supporting plastic core. Each rubber assembly is supplied for field installation in this pre-stretched condition. As the core is unwound, the insulating sleeve shrinks to form a tight seal.
DIN-716 or 4.3/10 Connection on 1/2″ Coax and DC Power Connection on Remote Radio Unit (RRU)
Reliable sealing – Easy to remove
Made of silicone rubber for a tighter shrink
Fits easily between tight connections
No foam build-up required prior to installation
Does not require use of butyl or threaded adapter on fully threaded connectors
|Hardness||DIN 53 505||Shore A||40|
|Specific gravity||DIN 53 479 A||g/cm³||1,11|
|Tensile strength||DIN 53 504 S1||N/mm²||10,2|
|Elongation at break||DIN 53 504 S1||%||850|
|Tear resistance||ASTM D 624 B||N/mm||25|
|Rebound resilience||DIN 53 512||%||58|
|Compression set||DIN 53 504 S1(22h / 175°C)||%||20|
|Dielectric strength||IEC 60250||KV/mm||>10|
|Volume resistivity||IEC 60093||Ohm cm||>1×1014|
|Cold Shrink technology||
No (heating) tools needed
Safer and quicker installation
|Proven Silicone material||Reliable sealing – Easy to remove|
|Total product line||A solution for any application|
|Tested application||Reliable installation|
|Application temperature||From – 20°C to + 50°C|
|Working temperature||130°C max|
|External environmental condition||UV resistant|
3M Part Number
|Minimum 11 mm||Maximum 41.0 mm|
|Product Number||L [mm]On core||L [mm]installed||L1 [mm]||d [mm]||D [mm]||Weight gross[kg]|
|RCL 8||130 +/- 10||140 approx.||170 +/- 10||44||51 max||0.05 approx.|
It is recommended to store the RCL 8 kits in a dry climate at a temperature of -40°C up to +50°C
Shelf life of RUNLIN RCL 8 Coax Connector Sealing Kits is specified with 12 month from date of manufacturing.
To request additional product information please fill in the form below.